Table of technical data
Details

measure in m.m.
Models of the desintegrate machine
DS-28
DS-33
DS-40
Diameter smaller coil + knives
A
280
335
400
Diameter of the bigger coil
B
400
470
560
Width of the rolls
C
350
420
500
Normal height of the knives
D
8
8
8
Normal recess between coils
E
10
10
10
Thickness of the knife
F
1/2
5/8
3/4
Normal width of the knife
G
1 1/2
1 3/4
2"
length between straps
H
1.400
1.670
1997
Total length
I
770
996
1.191
Base width
J
906
1.082
1.295
Total height
K
1.185
1.418
1.695
Height between the leather straps
L
974
1.297
1.393
Engine of the bigger coil 1700 RPM
4 Hp
7,5 HP
12,5 HP
Engine of the smaller coil 1700RPM
7,5 HP
12,5 HP
20 HP
Rotation of the bigger coil
225 RPM
225 RPM
225 RPM
Rotation of the smaller coil
500 RPM
500 RPM
500 RPM
Volume for clutch
1,67 m3
2,92 m3
5,11 m3
Total weight without engine
600 Kg
985 Kg
1.606 kg
Total weight with engine
676 Kg
1.129Kg
1.885kg

 

 
1 - Great course of regulation that allows the use of wider knives which is possible to work with more humid adobe on rainy weather and to operate with torrões.
2 - Rolamentos with two rows of roletes in ideal size to resist the great impacts of the rocks and strange bodies.
3 - Box of protection to allow the fast access of the coils if eventually happen some locking for strange body.
4 - Narrow channel of exit of the rocks perfect with height regulation in accordance with the type of adobe to facilitate the exit of the rocks that are projected and fall outside of the machine.
5 - Cleaning blade of the smmoth and bigger coil acting on pressure and hindering the more humid clay tack.
6 - The projection connected to the smaller coil, besides increasing the force of the impact of the knives, helps the engine, increasing its force in form of accumulated energy.
7 - Cover of the smaller coil supported to hinder that the coil stops when a more humid adobe enters in rainy days.
 8- System of support of the engines installed in tracks that allow the fast exchange of engines with different base in case of accidental burning of an engine, preventing the lost of production.
9 - Wide base to install with easiness a transporting leather strap of good width.
10 - Spare structure to the passage of the transporting leather strap, saving height, space and transporting leather strap.
11 - Engine installed not to hinder the passage of the transporting leather strap on the same ones, allowing a minimum height “L”, saving space and transporting leather strap.
12 - Spare laterally base to allow the exit of the leather strap on the lateral with maximum exploitation of height “L” and economy of space and transporting leather strap.

come back